Clicx utilizes QR code and/or NFC technologies depending on the tagtype you use. This means you can use either a QR code or an NFC scanner to scan Clicx tags.

You can scan either one tag at a time or many tags after another. If you read one tag, Clicx Mobile opens that asset's information on your smart device's screen. If you read many tags, the application will list the assets you collected.

If you haven't downloaded Clicx Mobile application, you can also scan QR codes with a third-party scanner. You can find the instructions at the end of this article.

⚠️ If your smartphone supports NFC and your tags are equiped with NFC, ensure the NFC scanner is activated. You can activate it in the same place as WLAN and Bluetooth.

Depending on your phone the NFC scanner is mostly located on the back of your smartphone.
You can locate the NFC detection area by moving the phone on top of a Clicx tag.
When the scanner is found, the tag is scanned automatically and Clicx Mobile app opens.

You can read a QR code by tapping Scan QR on Clicx Mobile Home screen.
The button opens the smartphone's camera that you can use to scan the tag.
Focus the camera on the QR code, and the scanning will happen automatically.

Use Scan tags feature to scan many tags after another. You can access the feature from the Home view (see the image above).
You can use either QR or NFC scanner for scanning the tags.
The collected assets will be listed and you can, for example, check them all out at once.

With modern Android and iOS devices, you can scan tags using the device's own camera. If you need a separate app for scanning, both platforms have good options in the app store.

When you scan a QR code, Clicx will open on your smartphone's browser.